sell Tags

description Description

Sound 2: For this second song I inserted a stereo track with the recorded sound of a heater, to this song I added a (Phaser) effect with 8 as the amount for the (stages), I set (Dry/wet) on 103. I put the amount of 0.6 to the (LFO frequency) and didn’t touch the (LFO Start Phase). The (Depth) was set on 125. I left the (Feedback) as it originally was (0) and last but not least, I added -6.0 to the (Output Gain) then I clicked on (Apply) at least 4 times. Then I added a second track to which I inserted a (Chirp) tone, the (Waveform) was set on (Sine), then I set the frequency on 440 at the start and 1320 at the end, the amplitude at the start and at the end was put on 0.8 and 0.1 respectively. Finally, I set the interpolation on (Logarithmic). To this tone I added a (Whawha) effect, the (LFO Frequency) and the(LFO Start Phase) were set on 0.8 and 60.0 respectively. The (Depth) was set on 34%, the (Resonance) on 2.1, and the (Wha Frequency Offset) on 21%. Finally, I set the output gain) on -6.0. A third track was added, this time I put a (Noise), I set the (Noise type) as (Brownian) and the (Amplitude) on 1. I added an (Adjustable Fade) to it, then I left the (Fade type) as it was, which means (Fade Up), I set the mid-faded adjustment on -59.0%, I left the (Start/End) as it was, I didn’t adjust the (Start or end) nor the (End or start) settings either. To finish with, I added a second stereo track and inserted a tone from my previous sound (The Joker) right underneath the (Noise tone), to pretend that the UFO is landing. I called this sound UFO because it makes me think of a UFO that is approaching the earth and then lands on it.